聚脲有什么特点？
——What are the characteristics of polyurea?
Catalyst-free, rapid
curing, can be any surface, inclined
and vertical
poly urea waterproof coating
Straight on spray
forming, not
sagging, 5 seconds
gel, one minute
can be achieved by walking
intensity.
· Not sensitive
to moisture, temperature
and construction from the influence
of ambient temperature, humidity
(at -28 ℃
construction; spraying
ice-curing).
Two-component, 100% solids,
聚脲does not contain any
volatile organic compounds
(VOC), environment-friendly,
non-polluting construction, health
and construction
harmless.
· Thermal spraying or
pouring, construction
thickness range from
hundreds of microns to a few centimeters,
to overcome the
shortcomings of previous construction.
· Excellent physical and chemical
properties, high
tensile impact strength,
flexibility, abrasion resistance,
anti-slippery, anti-aging, anti-corrosion.
· Having a good thermal stability
at 120 ℃ long-term
use, can withstand
350 ° C
in a short-time
thermal shock.
· Prototype reproducibility,
coating continuous,
dense, seamless,
pinhole-free, beautiful and practical
and durable.
· Use of construction
equipment, high efficiency;
once construction
to achieve the
requirements of the
design thickness,
聚脲the
device is equipped with a variety of
switching modes, either
spraying, pouring
good. Control access
through the construction process
and to achieve a
non-slip effect.
· Good cohesive force,
can be
sprayed on any substrate
such as
steel, wood, concrete
forming.
不含催化剂，快速固化，可在任意曲面、斜面及垂 聚脲防水涂料
直上喷涂成型，不产生流挂现象，5秒钟凝胶，1分钟即可达到步行强度。
· 对湿气、温度不敏感，聚脲施工时不受环境温度、湿度的影响（可在-28℃下施工；可在冰面上喷涂固化）。
· 双组分，100%固含量，不含任何挥发性有机物（VOC），对环境友好，无污染施工，卫生施工无害使用。
· 热喷涂或浇注，一次施工厚度范围可从数百微米到数厘米，克服了以往多次施工的弊病。
· 优异的理化性能，极高的抗张抗冲击强度、柔韧性、耐磨性、防湿滑、耐老化、防腐蚀。
· 具有良好的热稳定性，聚脲可在120℃下长期使用，可承受350℃的短时热冲击。
· 原形再现性好，涂层连续、致密，无接缝，无针孔，美观实用耐久。
· 使用成套设备施工，效率极高；一次施工即可达到设计厚度要求，设备配有多种切换模式，既可喷涂，也可浇佳。并可通过施工工 艺控制接达到防滑效果。
· 具有良好的粘结力，可在钢材、木材、混凝土等任何底材上喷涂成型。